11
Attaching the ring terminal
1.
Cut the grounding cable as appropriate for connecting to the grounding strip.
2.
Peel 5 mm (0.20 in) of insulation sheath by using the wire-stripping pliers, and insert the bare
metal part through the black insulation covering into the end of the ring terminal.
3.
Secure the metal part of the cable to the ring terminal with needle-nose pliers.
4.
Cover the joint with the insulation covering, and heat the insulation covering with a heat gun to
completely cover the metal part.
Figure 10
Attaching the ring terminal
Grounding the router through the rack
1.
Make sure the rack is reliably grounded.
2.
Remove the grounding screw from the grounding terminal on the router chassis.
3.
Use the grounding screw to attach the ring terminal of the grounding cable to the grounding
terminal.
4.
Use a screwdriver to fasten the grounding screw.
5.
Remove a nut from the grounding post of the rack.
6.
Use the needle-nose pliers to bend the bare wire at the other end of the grounding cable.
7.
Hook the grounding cable to the grounding post on the rack, and fasten the nut.
1
2
3
4
5
6
5mm
Grounding cable
Ring terminal
Insulation covering
