16
Views
Interface view
Predefined user roles
network-admin
Examples
# Configure Serial 2/1/0 to reject ACFC requests received from the remote peer.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ppp acfc remote-reject
ppp authentication-mode
Use
ppp authentication-mode
to configure PPP authentication on an interface.
Use
undo ppp authentication-mode
to restore the default.
Syntax
ppp authentication-mode
{
chap
|
ms-chap
|
ms-chap-v2
|
pap
} * [ [
call-in
]
domain
{
isp-name
|
default
enable
isp-name
} ]
undo ppp authentication-mode
Default
PPP authentication is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
chap
: Uses CHAP authentication.
ms-chap
: Uses MS-CHAP authentication.
ms-chap-v2
: Uses MS-CHAP-V2 authentication.
pap
: Uses PAP authentication.
call-in
: Authenticates the call-in users only. This keyword can be configured when the local end acts
as the receiving end of DDR calls. For more information about DDR, see
Layer 2
—
WAN Access
Configuration Guide
.
domain isp-name
: Specifies the ISP domain name for authentication, a case-insensitive string of 1
to 255 characters.
default
enable
isp-name
: Specifies the default ISP domain name for authentication, a
case-insensitive string of 1 to 255 characters.
Usage guidelines
PPP authentication includes the following categories:
•
PAP
—Two-way handshake authentication. The password is in plain text or cipher text.
•
CHAP
—Three-way handshake authentication. The password is in plain text or cipher text.
•
MS-CHAP
—Three-way handshake authentication. The password is in cipher text.
•
MS-CHAP-V2
—Three-way handshake authentication. The password is in cipher text.
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...
