190
Default
No SPID or LDN is configured for the B1 channel on an NI-enabled BRI interface.
Views
ISDN BRI interface view
Predefined user roles
network-admin
Parameters
spid
: Sets a SPID, a string of 1 to 20 digits.
ldn
: Sets a local dialing number, a string of 1 to 30 digits.
Usage guidelines
The command is available only on NI-enabled BRI interfaces.
When you use the command, follow these guidelines:
•
Make sure the configured SPID is the same as the SPID assigned by the service provider.
•
Configure an LDN depending on the service provider requirement. If an LDN is configured, the
setting for the
isdn calling
command becomes invalid.
•
You cannot configure a SPID in the following situations:
A call is present.
A SPID negotiation is present.
Examples
# Assign a SPID of
012345
and an LDN of
54321
to the B1 channel on BRI 2/4/0.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn spid1 012345 54321
Related commands
isdn calling
isdn spid2
isdn spid2
Use
isdn spid2
to assign a SPID to the B2 channel on an NI-enabled BRI interface.
Use
undo isdn spid2
to restore the default.
Syntax
isdn spid2 spid
[
ldn
]
undo isdn spid2
Default
No SPID or LDN is configured for the B2 channel on an NI-enabled BRI interface.
Views
ISDN BRI interface view
Predefined user roles
network-admin
Summary of Contents for MSR810
Page 148: ...136 Related commands timer hold...
Page 331: ...319 Related commands timer hold...
