H3C MSR 5660, Replacement Procedures, Page: 9 / 17

8
4. Carefully and firmly press the memory module at both ends until you hear a click. This indicates
the memory module is seated in the slot.
5. Verify that the release latches have firmly locked the memory module in position.
Figure 12 Removing a memory module
Figure 13 Installing a memory module
Replacing an SSD drive
CAUTION:
Before you remove an SSD drive, remove the MPU from the router. For the MPU removal
procedure, see "
Replacing an MPU ."
To remove an SSD drive:
1. Use a Phillips screwdriver to remove the fastening screws on the SSD drive.
2. Gently lift the SSD drive free from the connector.
Keep the SSD secure.
3. Install a new SSD drive. For the installation procedure, see "Installing the router."
1 2