4
S
TARTUP
AND
C
ONFIGURATION
Startup
You can only configure an H3C MSR 30 router through the console port if it is the
first time you use it.
Setting up
Configuration
Environment
Connecting the router to a console terminal
To set up the local configuration environment, RJ-45 connector of the console
cable needs to be connected to the console port on the router, and DB-9
connector to the serial interface of a PC, as shown in the following figure.
Figure 43
Local configuration through Console port
Setting the parameters for console terminal
1
Opening the console terminal and setting up a new connection. When you
perform local configuration, as shown in the following figure, choose the interface
