H3C MSR 20/30/50 Series Routers User Manual
Chapter 5 Software Maintenance
Note:
z
After reboot, the system runs with the initial default configuration. The original
configuration files are stored in memory. To restore the original configurations, you
can use the
display saved-configuration
command to display them, and then
copy and execute them.
z
When storing the password in plain text, you can use the
display
current-configuration
command to see the password in the current configuration.
If you use the
set authentication password cipher 123456
command when
setting the password, the password is encrypted and stored.
Step 4: Save the new configuration.
[H3C] save
Note:
Execute the
save
command after modifying the user password to save the new
password.
5.8.2 BootROM Password Loss
Contact the agent or our technical support personnel in the event of BootROM
password loss. They can help you set a new password.
Modify the BootROM password under the main BootROM menu.
Enter <5> to modify the password following the prompt. The console terminal displays:
Change password.
Old password: Enter the old password
New password: Enter the new password
Verify: Enter the new password again
........Password Set Successfully. The new password is set successfully
Note:
The password modification fails when old password is not correct or new password is
not correctly entered, and then the system exits this operation.
5-27
