H3C MS4600 Series Command Reference Manual Download Page 6

Page: 6 / 43

Contents

IRF commands ······························································································ 1

display irf ···················································································································································· 1

display irf configuration ······························································································································ 2

display irf link ·············································································································································· 3

display irf topology ····································································································································· 4

display mad ················································································································································ 5

easy-irf ······················································································································································· 8

irf auto-update enable ······························································································································ 10

irf domain ················································································································································· 11

irf link-delay ·············································································································································· 11

irf mac-address ········································································································································ 12

irf mac-address persistent ························································································································ 13

irf member description ······························································································································ 14

irf member priority ···································································································································· 15

irf member renumber ································································································································ 15

irf-port ······················································································································································· 16

irf-port-configuration active ······················································································································· 17

mad arp enable ········································································································································ 18

mad bfd enable ········································································································································ 19

mad enable ·············································································································································· 22

mad exclude interface ······························································································································ 23

mad ip address ········································································································································· 24

mad nd enable ········································································································································· 25

mad restore ·············································································································································· 26

port group interface ·································································································································· 27

IRF 3.1 commands ······················································································ 29

description ················································································································································ 29

display pex interface ································································································································ 29

display pex topology ································································································································· 31

pex associate ··········································································································································· 32

pex auto-config enable ····························································································································· 32

pex group ················································································································································· 33

pex idle-cascade delete ··························································································································· 34

pex local-forwarding ································································································································· 34

pex persistent-forwarding ························································································································· 35

pex-capability enable ······························································································································· 36

switchto pex ············································································································································· 37

Summary of Contents for MS4600 Series












































Search results

Summary of Contents for MS4600 Series

Reviews:

Related manuals for MS4600 Series

Brands by name

Popular brands

H3C MS4600 Series, Command Reference Manual

Search results

Summary of Contents for MS4600 Series

Reviews:

Related manuals for MS4600 Series

Brands by name

Popular brands