36
Parameters
text
: Specifies a description, a case-sensitive string of 1 to 255 characters.
Examples
# Configure the description as
gateway for VXLAN 10
for VSI-interface 100.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100] description gateway for VXLAN 10
display interface vsi-interface
Use
display interface vsi-interface
to display information about VSI interfaces.
Syntax
display interface
[
vsi-interface
[
vsi-interface-id
]
]
[
brief
[
description
|
down
]
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsi-interface
[
vsi-interface-id
]
: Specifies VSI interfaces. If you specify a VSI
interface, this command displays information about the specified interface. If you specify only the
vsi-interface
keyword, this command displays information about all VSI interfaces. If you do
not specify the
vsi-interface
[
vsi-interface-id
]
option, this command displays
information about all interfaces. Make sure the specified VSI interfaces have been created on the
device.
brief
: Display brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description
: Displays complete interface descriptions. If you do not specify this keyword, the
command displays only the first 27 characters of interface descriptions.
down
: Displays interfaces that are physically down as well as the down reason. If you do not specify
this keyword, the command does not filter output by physical interface state.
Examples
# Display information about VSI-interface 100.
<Sysname> display interface vsi-interface 100
Vsi-interface100
Current state: UP
Line protocol state: UP
Description: Vsi-interface100 Interface
Bandwidth: 1000000 kbps
Maximum transmission unit: 1500
Internet address: 10.1.1.1/24 (primary)
IP packet frame type: Ethernet II, hardware address: 0011-2200-0102
IPv6 packet frame type: Ethernet II, hardware address: 0011-2200-0102
Physical: Unknown, baudrate: 1000000 kbps