12
ip route-static default-preference
default-preference
The default preference is 60.
Configuring RIP between an MCE and a PE
1.
Enter system view.
system-view
2.
Create a RIP process for a VPN instance and enter RIP view.
rip
[
process-id
]
vpn-instance
vpn-instance-name
3.
Enable RIP on the interface attached to the specified network.
network network-address
[
wildcard-mask
]
By default, RIP is disabled on an interface.
4.
Redistribute the VPN routes.
import-route protocol
[
as-number
] [
process-id
|
all-processes
|
allow-ibgp
]
[
allow-direct
|
cost
cost-value
|
route-policy
route-policy-name
|
tag tag
]
*
By default, no routes are redistributed into RIP.
Configuring OSPF between an MCE and a PE
1.
Enter system view.
system-view
2.
Create an OSPF process for a VPN instance and enter OSPF view.
ospf
[
process-id
|
router-id router-id
|
vpn-instance
vpn-instance-name
]
*
3.
Disable routing loop detection.
vpn-instance-capability simple
By default, routing loop detection is enabled and the MCE does not receive OSPF routes from
the PE.
4.
Redistribute the VPN routes.
import-route
protocol
[
as-number
] [
process-id
|
all-processes
|
allow-ibgp
]
[
allow-direct
|
cost
cost-value
|
nssa-only
|
route-policy
route-policy-name
|
tag tag
|
type
type
]
*
By default, no routes are redistributed into OSPF.
5.
Create an OSPF area and enter OSPF area view.
area
area-id
6.
Enable OSPF on the interface attached to the specified network in the area.
network
ip-address wildcard-mask
By default, an interface neither belongs to an area nor runs OSPF.
Configuring IS-IS between an MCE and a PE
1.
Enter system view.
system-view
2.
Create an IS-IS process for a VPN instance and enter IS-IS view.
isis
[
process-id
]
vpn-instance
vpn-instance-name
