Manual version: 6PW101-20170601
BOM: 3123A0YC
ii
3.1
Installing the card
1.
Release the ejector levers by pressing the spring clips.
2.
Insert the card slowly into the slot until the brakes of the ejector levers touch the slot edges
tightly.
3.
Simultaneously rotate the ejector levers inward until the spring clips lock the ejector levers in
place and the card is completely seated in the slot.
3.2
Removing the card
1.
Release the ejector levers by pressing the spring clips.
2.
Simultaneously rotate the ejector levers outward and then pull out the card.
3.
Install a filler panel in a switching fabric module slot if you are not to install a switching fabric
module in it.
4 Obtaining documentation
For card installation, see
H3C S12500X-AF Switch Series Installation Guide
.
To access the most up-to-date H3C product documentation, go to
For software upgrade, see the release notes for the device.
To access the release notes, go to
Copyright © 2017 New H3C Technologies Co., Ltd.
