H3C LSWM18QC, User Manual, Page: 6 / 7

6
Figure 3 Installing an LSWM18QC interface card
Removing an interface card
CAUTION:
• Before you remove an interface card, remove the cable from
it to avoid cable damage.
• After removing an interface card, if no new interface card is
to be installed, install the filler panel as soon as possible to
prevent dust and ensure good ventilation in the device.
To remove an interface card:
1.
Prepare an anti-static bag.
2.
Press the latch to release the ejector lever
3.
Rotate outward the ejector lever as shown by callout 1 in Figure 4 .
4.
Pull out the interface card slowly out of the interface card slot, as
shown by callout 2 in
Figure 4 .
5.
Place the removed interface card in the anti-static bag.
Figure 4 Removing an LSWM18QC interface card