H3C LSQM1CGS2QSA0, User Manual, Page: 7 / 8

7
Removing the card
CAUTION:
To avoid cable damage, remove the cables from the card before
removing the card.
To remove the card:
1.
Prepare an anti-static bag.
2.
Press the latch to release the ejector lever
3.
Rotate outward the ejector lever as shown by callout 1 in Figure 4 .
4.
Pull out the interface card slowly out of the interface card slot, as
shown by callout 2 in
Figure 4 .
5.
Place the removed interface card in the anti-static bag.
6.
If you are not to install a new card, install a filler panel in the slot to
prevent dust and ensure good ventilation in the device.
Figure 4 Removing the LSQM1CGS2QSA0 interface card
Installing and removing QSFP28/QSFP+ transceiver
modules and cables
For information about installing and removing QSFP28/QSFP+
transceiver modules and cables, see
H3C QSFP+[QSFP28]
Transceiver Modules and Cables Installation Guide
.