H3C LSPM2SP2P, User Manual, Page: 4 / 6

4
Installing the interface card
Installing the interface card to the switch
Note:
The procedure of installing the LSPM2SP2P interface card
to different models of H3C switches is similar. This manual
takes the S5500-28C-EI switch as an example.
Follow these steps to install the interface card to the switch:
(1) Wear an ESD-preventive wrist strap, and make sure that the
ESD-preventive wrist strap makes good skin contact and is
properly grounded.
(2) Loosen the mounting screws of the filler panel on the interface
card slot of the switch with a Phillips screwdriver and remove the
filler panel, as shown in
Figure 2 .
Figure 2 Install an interface card (I)