8
Caution:
When installing or removing an interface card, note the
following guidelines:
Do not touch the surface-mounted components directly
with your hands.
Do not use too much force in the operation.
After removing an interface card, if no new interface card
is to be installed, install the filler panel as soon as
possible to prevent dust and ensure normal ventilation in
the switch.
Installing an XFP transceiver module
To avoid component damage caused by improper installation,
carefully read the
H3C Pluggable SFP/SFP+/XFP Transceiver
Modules Installation Guide
from the H3C's website before installing
the XFP transceiver modules.
Installing and removing the dedicated CX4 cable
Installing the dedicated CX4 cable
Figure 6
CX4 cable
Caution:
Make sure that you have installed the LSPM1CX2P
interface card before installing dedicated CX4 cables.
Follow these steps to install the dedicated CX4 cable:
(1) Wear an ESD-preventive wrist strap and make sure it is properly
grounded. Then unpack the dedicated CX4 cable.
(2) Horizontally insert the plug of the dedicated CX4 cable into the
CX4 port of the switch and pay attention to the direction of the
plug when plugging it.
