H3C H3C S7500E Series Configuration Manual Download Page 6

Page: 6 / 112

Category

Documents

Purposes

H3C
PSR320-A[PSR320-D]
Power Module User
Manual

Describes the appearance, specifications, LEDs, and
installation and removal of the H3C
PSR320-A/PSR320-D power module.

H3C
PSR650-A[PSR650-D]
Power Module User
Manual

Describes the appearance, specifications, LEDs, and
installation and removal of the H3C
PSR650-A/PSR650-D power module.

H3C
PSR1400-A[PSR1400-D]
Power Module User
Manual

Describes the appearance, specifications, LEDs, and
installation and removal of the H3C
PSR1400-A/PSR1400-D power module.

H3C PSR2800-ACV
Power Module User
Manual

Describes the appearance, specifications, LEDs, and
installation and removal of the H3C PSR2800-ACV
power module.

H3C PSR6000-ACV
Power Module User
Manual

Describes the appearance, specifications, LEDs, and
installation and removal of the H3C PSR6000-ACV
power module.

H3C PWR-SPA Power
Module Adapter User
Manual

Describes the functions and appearance of the H3C
PWR-SPA power module adapter, and how to use it
with the PSR650 power module.

Power configuration

H3C S7500E Power
Configuration Guide

Guides you to select power modules in various cases.

Optional cards

Card manuals

The S7500E series Ethernet switches support various
card models. Each model is provided with a card
manual that describes:

The type, number, and transmission rate of
interfaces

Applicable switches of the card

Required software version

Pluggable modules supported by the card

Obtaining Documentation

You can access the most up-to-date H3C product documentation on the World Wide Web at

http://www.h3c.com

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents]

– Provides hardware installation, and

software feature configuration and maintenance documentation.

[Products & Solutions]

–

Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download]

– Provides the documentation released with

the software version.

Documentation Feedback

You can e-mail your comments about product documentation to [email protected].

We appreciate your comments.

Summary of Contents for H3C S7500E Series

















































































































Search results

Summary of Contents for H3C S7500E Series

Reviews:

Related manuals for H3C S7500E Series

Brands by name

Popular brands

H3C H3C S7500E Series, Configuration Manual

Search results

Summary of Contents for H3C S7500E Series

Reviews:

Related manuals for H3C S7500E Series

Brands by name

Popular brands