8
Table 3
Output description
Field Description
In-Interface
Inbound interface of the packet
ACFP rule total number
Total number of ACFP rules
ClientID
Client ID, index of client list
Policy-Index
Policy index
Rule-Index
Rule index
SMAC
Source MAC address
DMAC
Destination MAC address
StartVLAN
Start VLAN of the source VLAN
EndVLAN
End VLAN of the source VLAN
PackRate
Value of the restricted rate of packets, in kbps.
SIP
Source IP address
SMask
Inverse mask of source IP address
SPort
Source port number
DIP
Destination IP address
DMask
Inverse mask of destination IP address
DPort
Destination port number
Protocol
Protocol of the packet: GRE, ICMP, IGMP, IPinIP, OSPF, TCP, UDP, IP,
and so on.
Fragment
Whether the packet is a fragment:
•
true: Indicates the packet is a fragment
•
false: Indicates all the packets, not concerned about whether the
packet is a fragment or not
ToS
Type of Service, indicated by a number in the range of 0 to 15
Pre
Packet precedence, indicated by a number in the range of 0 to 7
DSCP
Differentiated Services Code Point, indicated by characters for Be, Ef,
Af11, Af12, Af13, Af21, Af22, Af23, Af31, Af32, Af33, Af41,
Af42, Af43, Cs1, Cs2, Cs3, Cs4, Cs5, Cs6, and Cs7 and indicated
by a number in the range of 0 to 63 for other code points
TCPFlag
The value is six bits, which represents URG, ACK, PSH, RST, SYN, and
FIN respectively from low to high.
TCPMask
The value is six bits, which represents URG mask, ACK mask, PSH
mask, RST mask, SYN mask, and FIN mask respectively from low to
high.
For each bit, the value 1 indicates that this bit is concerned, and the
value 0 indicates that this bit is not concerned.
