H3C FC680i Mezz, User Manual

Page: 19 / 37

3
Figure 14 Compiling the file and installing the driver
d. After the installation finishes, restart the system or execute the
rmmod qla2xxx
and
modprobe qla2xxx commands to have the driver take effect.
e. Execute the
modinfo qla2xxx
command again to view the driver version and verify that
the new driver has taken effect.
Uninstalling the driver
To uninstall the driver installed by using an .rpm file, execute the
rpm –e qla2xxx
command. Then,
restart the system or execute the
rmmod qla2xxx
and
modprobe qla2xxx
commands to load
the old driver.
To uninstall the driver installed by using a .tar.gz source file, enter the qla2xxx-<ver> directory where
the source file resides, and execute the ./extra/build.sh remove command as shown in
Figure 16 .
Figure 15 Uninstalling a driver installed by using a source file
Windows operating system
Viewing the current driver version
1. Click the Start icon to enter the menu.