Manual Version:5PW100-20120627
6
Figure 7
Mounting the M6 bolts
(1) Cable
(2) Antenna
(3) M6 bolt
3.
Thread the antenna cable and M6 bolts through the holes you drilled in step 1 until the base of the
antenna is flush with the ceiling. Thread the M6 hex nut, flat washer, and spring washer (callout 4
) through the M6 bolt (callout 3 in
) and fasten them until the antenna is secured
in place.
4.
Fasten the other M6 bolt with the other set of M6 hex nut, flat washer, and spring washer.
Figure 8
Mounting the antenna
(1) Ceiling
(2) Cable
(3) M6 bolt
(4) M6 hex nut/flat washer/spring washer
T-rail mounting
To mount the antenna by using a T-rail:
1.
Use the paper mounting template to mark the holes on the ceiling where you want to mount the
antenna and then drill five holes in the ceiling. See
.
