User Manual
H3C S1216/1224 Ethernet Switch
Chapter 2 Switch Installation
2-3
Thereby, the filter circuit in the equipment can effectively
filter interference from the power supply system.
z
Keep the switch far away from high-power radio launchers,
radar launchers, and equipments with high-frequency and
high-current.
z
Use electromagnetic shielding if necessary. For example,
use shielded port cable.
z
Wire the port cable indoors. Outdoor cabling is prohibited, to
prevent the signal port from possible damages that may be
caused by overvoltage and overcurrent of lightning strike.
2.2 Installing the Switch
Note:
During the installation, you are recommended to wear an
ESD-preventive wrist strip, which can be connected to the grounding
cable of the workbench, to eliminate possible static damage to the
switch.
2.2.1 Sticking feet
Step 1: Remove the paper covering the adhesive end of the feet.
Step 2: Stick the adhesive end of the feet to the circular recess on
the bottom of the chassis.
2.2.2 Connecting Power Cord
Step 1: Check if the required power supply unit is used.