7. Insert the top screw first using a Phillips,
(cross-head), screwdriver. Turn the screw
until barely snug. Do not tighten yet.
8. Insert the lower screw next and turn it till
barely snug. Move the handle to the right a
little so that the black reference line is just
covered evenly by the handle edge.
9. While making sure
the handle is vertically
aligned with the black
reference line, tighten
both screws. The
handle should be
opposite the spout. If
necessary, loosen the
screws to re-adjust.
10. Lift the Carafe by the handle a few inches
above table surface and GENTLY shake the
Carafe to verify that the handle is securely
assembled. Tighten the screws more if the
handle feels loose.
- 5 -
