BACK
Power cord
Radiator Grille
Support Frame
4.- DRAINAGE.
16
•
Install the drain hose included in the machine's drain nipple and direct the pipe
to the desired area before operating the machine.
•
When the pump is full for 3 seconds, the "full" light comes on and the pump
starts running; 30 seconds later, the pump stops working.
•
When the pump is full for 1 minute and is detected by the water level switch,
the display will show "E4", the buzzer sounds 15 times, the dehumidifier will stop
working and the pump relay will break.
•
When the pump drains the water normally, the compressor and the motor work
well.
