Operation and Setting
7. Errors
Problem to the hot temperature control, not connected or over 105
o
C.
Temperature rises too quickly or empty heating. Will return to normal when
water is added. Please contact distributor when error keeps appearing.
Constant heating for 1 hour or not reaching the set temperature. If water is
added during the heating, the timer starts over.
Problem to the cold temperature control, not connected or over 70
o
C.
Constant chilling for 8 hours or not reaching the set temperature.
Fan error, disconnected or damaged.
Leaking detected on the bottom plate. Please reconnect to electricity.
Water-in solenoid valve or related parts damaged, might cause leaking.
IC board self testing. Problem with electro voltage.
Providing water for over 40 seconds or buttons jammed. Remove button
jam to return to normal status.
Drip collector is full over 3 seconds. Drain the collector to return to
normal status.
C101
C102
C103
C201
C202
C203
C301
C302
C303
OFF
FULL
8. Alarm and Malfunctions
When
C101
to
C302
appears, chilling and heating systems are both off. When
C101
to
C202
appears, water may still be provided. The unit will make short beeping
sounds when malfunctions occur, please restart to stop the alarm.
When
C301, C302, C303
or
OFF
appears, water supply and power system will be off.
This unit makes alarm sounds when the following conditions happen:
OFF, FULL, UV
malfunction, and change filters.
The alarm will be 3 long beeps every 30 seconds and
WARN
flashes on the display.
To stop the alarm, just press set. WARN sign will be gone for 10 seconds. After 10
seconds,
WARN
flashes again until the problem is solved. During this time, if other
problems are detected, the alarm will beep again.
14
