Hydro-GEN
www.h2olifesource.com
Directions for Use
Overview
•
Remove the cap and the spray pump. Then fill the bottle with water.
•
Press the On/Off button located at the bottom. Green LED indication light will illuminate.
•
Press the On/Off button again to start producing hydrogen sterlizing water. H2O Hydro-GEN
TM
Beauty is programmed to produce hydrogen sterlizing water in 2 minutes.
•
To stop the hydrogen generation press the On/Off button again.
Cap
On/Off
Button
On/Off Button
Spray Pump
Jack Lid
Jack Lid
LED Indication
Adapter Jack
(Micro 5Pin)
FRONT
VIEW
BOTTOM
VIEW
INSIDE
VIEW
LED
Indication
Light
Hydrogen
Water
Generator
Package Components
Manual
Adapter
USB Cable
Warranty Card
How to Clean
Maintenance is necessary to ensure good performance of the product for a long time. As
bubbles are reduced during production, it is time to clean. The hydrogen water generator is
delicate, clean it carefully.
If minerals and calcium start to accumulate in the hydrogen generator, it will hinder hydrogen
generation, and foreign matter and offensive odor may be discharged from the hydrogen
generator.
Clean the product according to the following guidelines before starting to use the product.
Cleaning of Hydrogen Generator
• Fill the bottle with water and add 1-2 drops (not more than 5ml) of vinegar.
• Press the On/Off button to generate hydrogen for 1-2 cycles, then rinse with clean water.
• Recommended to clean once every 2 weeks, if used daily.
How to Charge
After a certain period of time, the internal battery will normally be discharged.
1. To charge, open the jack lid and connect the USB adapter
(micro 5 pin) charging cable.
2. When the battery is fully charged, the RED LED light will
change to GREEN. You may disconnect the USB cable
and close the jack lid.
USB Adapter Jack
(Micro 5Pin)
WARNING:
Never put metal or liquid inside the USB adapter jack.
Recharging is between 2~4 hours. Recharge the battery when
LED indication light is RED.
