Setting Up Your EcoSmart
TM
Alkaline Water
Dispenser
6
1. Plug in all necessary connectors to the set-up.
2. Place the 10-litre SMART Bottle onto the base unit and close the lid fully.
3. Ensure that both power and water supply have been turned on.
Refer to the LED Indicator Chart for these indications.
4. During the first few minutes, do not be alarmed at the blackish colour of the first
3 litres of water. This is a cleaning process that flushes the filters.
5. Once the water becomes clear, empty the SMART bottle by lifting the lid carefully.
6. Place the SMART bottle back onto the base unit and close the lid.
7. The auto-refill process will now begin. (This process takes place when the water
level falls below the auto-refill sensors.)
8. The refilling process will stop automatically when it reaches full capacity.
9. You may now use dispenser normally.
10. Enjoy fresh and clean alkaline water anytime, anywhere!
