User’s Manual & Warranty
H2O-GSB3C
COOLING TECHNOLOGY
PARTS
1.
On/off indication light
2.
Cooling indication light
3.
Button water room temperature
4.
Button cold water
5.
Tab
6.
Base
7.
Drip tray
8.
Adapter
9.
Probe
10.
Water divider
11.
Rubber cap for bottles of 5 L +
BEFORE FIRST USE
Unwrap your appliance.
Clean all removable parts in warm water and dry all parts thoroughly.
Add 500 ml into the water tank and let it run through the appliance. Press the water
buttons to remove the water.
USE
- Your water dispenser can be used with bottles from 0,33 L up to 20 L.
- Place the water divider.
- Place the adapter on top of the unit and turn it counter clockwise until it locks.
- Placing a bottle up to 20 L :
Take the bottle and remove the cap. Place the bottle over the probe with a fast motion.
- Placing a bottle of 5L and more :
Remove the cap from bottle and place the enclosed rubber cap over the opening of
the bottle. Holding it vertical, place the bottle
gently
over the probe.
- Plug in the unit and turn it on at the on/off button at the back.
- Both indication lights at the front of the unit will light up.
- Give the water dispenser time to cool the water. (One hour) As soon as the water is
cooled the cooling light will go out.
Your water dispenser can not be used for other beverages.
IMPORTANT : DON’T USE ANY CARBONATED WATER IN THE DISPENSER.