QUICK START GUIDE:
continued
3. PLAYING AUDIO
Select the audio player on your source device
& select play via H2O Audio SG8-BT.
The audio will automatically start streaming
to the headset.
Press MFB once to PAUSE audio & again to PLAY audio.
Adjust volume level by pressing Volume UP key
or Volume DOWN key.
Skip Track press and hold Volume UP key or
Volume DOWN key.
4. TROUBLESHOOTING
Problem 1
Mobile phone can’t find the Bluetooth headphone.
Solution:
1)
Confirm that both devices are in ‘pairing’ mode:
a) Make sure the headset is turned ON and in
‘pairing’ state (This occurs when the LED
red and blue lights flash rapidly).
b) Follow the instructions on your mobile (or
Bluetooth device) to make sure it’s in
‘pairing’ mode.
2)
If ‘pairing’ is not accomplished, please restart your
mobile phone and Bluetooth headphone.
NOTE:
When the headset is paired, the blue LED light
will flash every 2 seconds.
Problem 2
After connecting the Bluetooth headphone with your
mobile phone, it gets disconnected frequently or
makes lots of noise (static).
Solutions:
1)
Make sure the Bluetooth headphone is fully charged
(if battery is low, Bluetooth connection is weak).
2)
Please remove any physical obstructions
(walls, columns, doors, etc.) to allow clear visibility
between the 2 paired devices.
3)
Try minimizing the number of other wireless devices
(wireless Internet routers, modems, cordless
handsets, etc.) nearby to reduce interference.
If needed, try going into a separate room with
the headset and your phone (or any other
Bluetooth paired device).
Summary of Contents for SURGE BT SG8-BT
Page 1: ...User Guide...
