Occasional Descaling Maintenance
:
Depending on the mineral oxide content in your drinking water, clean the
electrolysis plates by descaling once a month if necessary. To descale simply add 1
part either white vinegar, lemon juice or citric acid to 3 parts water into the bottle
and leave generator soaking in mix overnight.
Dump and rinse thoroughly with warm water before using again.
Disclaimer: These Products have not been evaluated and are not
intended to diagnose, cure, treat or prevent disease. Seek medical
advice if seriously ill and or attempting to cure or prevent disease.
Trouble Shooting
No visible bubbles
•
Check power source
No light when
operating unit
•
Low battery indicator
•
Charge Unit ASAP
Low PPM levels
when tested with
Blue Drops
•
Operate the unit more times to activate
PEM membrane
Wetness in Generator
•
Units are shipped wet
Battery not charging
•
Check for defective Plug or cable
Machine is
Leaking water
•
Check all seals, tighten lid
•
Fill water up to 90 % of the Bottle
Bottle has odor or
Unit makes less gas
•
Clean descale as needed
•
Use different water source
Unit stopped working
•
Contact For Support
Glass bottle broke
•
Contact to order replacement
Unit stopped charging
•
Contact For Support
For All Other Issues or Unsolved Problems Contact For Support
Warranty: One Year due to defective Parts or Labor