Modelle / Models B600 & B900
12
GENERAL INFORMATION
This central vacuum is designed to vacuum ordinary household dirt and dust.
The system is designed for dry pickup. A WetVac accessory is needed if the
system will be used for liquid pickup.
The central vacuum system is a network of inlet valves, 2” PVC tubing, and low
voltage wiring installed in the walls of your home.
The dirt is transported through the in-wall tube system back to the dirt canister
(located on the power unit).
REGISTRATION
To register your CROSSVAC Central
Vacuum System for warranty, contact
your installing builder/dealer.
Proof of purchase or registration
of the CROSSVAC Central Vacuum
System is required before any
warranty work will be performed by
an Authorized Dealer. Registration
ensures a fast and easy resolution
for all your warranty needs.
OPERATING INSTRUCTIONS
Using your central vacuum system
is easy. Simply raise the inlet valve
lid, insert the hose end and attach
the desired cleaning tool to the hose
wand. The power unit is activated
when the hose is inserted into the
valve. When using the inlet valve
on the power unit, the on/off switch
must be in the ON position.
GENERAL POWER UNIT MAINTENANCE
The simple care and maintenance instructions included here will help ensure
trouble-free use of your central vacuum system.
•
Do not place objects on top of the power unit. The motor could overheat.
•
Do not allow the motor to remain ON unless a hose is connected or an inlet
valve is open. If airflow is not permitted to flow through fan blades, motor
damage may occur.
•
The power unit does not require any lubrication.
•
The exterior of the power unit can be wiped with a clean, dry cloth. Do not
use liquid cleaners or water as an electrical shock may occur.
•
For additional service contact an Authorized Servicing Dealer.
