appendix
file: n:\article\cos30022man-en\20140206_cos30022man-en_h-p-cosmos_robowalk_expander_manual.doc
© 2014 h/p/cosmos sports & medical gmbh author: fh [email protected] created 06.02.2014 printed 06.02.2014 page: 60 of 67
13
Appendix 2: Protocols
13.1
Adjustment table
For a successful therapy it is necessary to get reproducible data of the patient’s progress (or regress). Therefore the
h/p/cosmos robowalk
®
expander allows you to note any parameter you set for your patient.
Use the following adjustment table from the first treatment on, to facilitate your daily work. Maybe the first settings will
cost some more time until you found the right parameters for each patient, but later on you will have the data on your
sheet and setting becomes much faster.
The adjustment table allows you to:
-
confer the settings from one day to the next.
-
confer the settings from one patient to the next.
-
document the training / therapy without interruption
In the following you will get an introduction in the way of documentation for the h/p/cosmos robowalk
®
expander system
by some examples.
1.
Right ankle on expander 8, position 1, black expander. Pull out 7 is also on position 1 and increases the power
by pretension 2 (expander is pulled out until scale shows a pretension of 2, than it is fixed in the clam cleats).
2.
Left ankle on expander 6, position 1, black expander. Pull out 5 is on position 2 to decline the pulling force.
3.
The arrest elements are on position 0 at the moment.
4.
Right upper leg on expander 3, position1, grey expander. Pull out 4 is on position 3 to decline the pulling force.
5.
Left upper leg on expander 1, position 1, grey expander. Pull out 2 is on position 2 to decline the pulling force.
6.
Paul Patient trained with a treadmill velocity of 2 km/h with 0% elevation for 10 minutes.
