manualshive.com logo in svg

h/p/cosmos 170-190/65 3p Series, Original Instructions Manual

Share
Download
h/p/cosmos 170-190/65 3p Series Original Instructions Manual Download Page 23

page 23 of 99

cos105000_170-190_65, rev. 1.03

© 1988 - 2019 h/p/cosmos sports & medical gmbh

4.3 Emergency dismount

Subject is conscious and aware of danger.

 

❚

Subject grabs the handrails

 

❚

Subject jumps off the running belt onto the foot rails

 

❚

Operator / subject hits the emergency off

Subject is conscious but not aware of danger.

 

❚

Subject stumbles and falls into fall prevention device.

 

❚

Treadmill stops

 

❚

Operator / subject hits the emergency off

 

❚

Operator helps subject stand up again.

 

❚

Operator helps subject exit the device.

Subject lost consciousness and is hanging in the fall prevention device.

 

❚

Hit the emergency off.

 

❚

Call a medical doctor.

 

❚

Call one or more persons, strong enough to carry the subject.

 

❚

Inform the third person that you will open the buckle of the safety harness

 

❚

Open the buckle of the safety harness.

 

❚

Subject will slide into the other person’s arms.

 

❚

Render first aid.

Summary of Contents for 170-190/65 3p Series




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands