
©H-‐Mod, Inc. 2015
www.stealthswitch.com
P a g e |
2
6.
Follow the installer instructions to complete the install
7.
Software will be fully installed when the following message is displayed,
“StealthSwitchPro has been successfully installed on your computer”
8.
Click “finish” to launch program
9.
If running Windows XP, plug in the StealthSwitchPro hardware (See StealthSwitchPro
Hardware Installation below). If running Vista, Windows 7, or Windows 8, follow the
steps below:
a.
Search for the StealthSwitchPro 3.0 Configurator software
b.
Right click on SSPro 3.0 Configurator software and “Pin to Taskbar” (The SS icon
will now be displayed in the taskbar)
c.
Right click on SSPro 3.0 Configurator shortcut in taskbar, click on “Properties”
d.
Once in Properties, click the “Compatibility” tab
e.
Check “Run as Administrator”
f.
Click “Apply”
g.
In “Compatibility mode” check the box that says, “Run this program in
compatibility mode for”
i.
Select “Windows XP (Service Pack 3)