Caution:
1.
Over-filled can block the operation, please turn off the unit
and do not connect the plug, take out some of material, then
operating.
2.
Do not use unit continuous more than 1 minute
CLEANING AND STORAGE
l
In addition to this, you must refer to the security precautions.
l
Do not clean Motor main body, power cord and plug with water.
l
Clean the engine base with a soft, wet piece of cloth and some
mild cleaning agent.
l
Fill the jug half-full with hot water and a little cleaning agent. Let
the unit run on speed 2 until the jug is clean.
l
The base with the blades can be taken apart. Screw of the base
counter-clockwise. Take out the blades together with sealing ring
facing upwards.
l
Now clean jug, lid, closure, base and blades with sealing ring
with hot water and some cleaning agent. Dry well before re-using.
Caution! The blades inside of the jug are very sharp.
l
Never use aggressive cleaning agents.
Warning:
Do not to touch the sharp blade. When clean, please wipe by
dishcloth, to avoid accidentally injure.
