assembled and always unplug before disassembling the appliance
or handle the blade.
8.
Don’t let the motor unit, cord, or plug get wet.
9. Never use a damaged appliance. If it has been damaged, please
get it to approved service center, checked or repaired.
10. If the supply cord is damaged, it must be replaced by approved
service center.
11.
Don’t let excess cord hang over the edge of the table or worktop or
touch hot surface.
12. The blades are very sharp!
13.
Don’t place the appliance in the hot ingredients.
14. The appliance is constructed to process normal household
quantities.
15. Neither the measuring beaker, nor the chopping bowl is microwave
proof.
16. Short-time operating. Use the appliance according to the table of
Processing Guide.
14. If you want to operate the unit for more than one cycle, you should
wait at least 3 minutes before the next working.
15. Do not use the masher to process uncooked food.
How to use the hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well as for mixing and milkshakes.
1. Take the blender stick on the motor unit until it locks.
2. Introduce the hand blender in the measuring beaker. Then press
switch
Ⅱ
or choose speed
“1”-“5” and press the switch
Ⅰ
3. Take the blender stick out off the motor unit after use.
You can use the hand blender in the measuring beaker and just as
well in any other vessel.
How to use your chopper
1. Chopper is perfectly suited for hard food, such as meat, cheese,
onion, herbs, garlic, carrots, walnuts, almonds, prunes etc.
2. Don
’t chop extremely hard food, such as ice cubes, nutmeg, coffee
beans and grains.
Before chopping
…
1. Carefully remove the chopping bowl lid from the blade.
Caution:
the blade is very sharp!
Always hold it by the upper plastic part.
2. Place the blade on the center pin of the chopper bowl. Press down
the blade and lock bowl. Always place the chopping bowl
3. Place the food in the chopping bowl.
4. Place the chopping bowl lid on the chopping bowl.
5. Turn the motor unit on the chopping bowl lid until it locks.
6. press switch
Ⅱ
or choose speed
“1”-“5” and press switch
Ⅰ
to
operate the chopper. During processing, hold the motor unit and
the chopper bowl.
7. After use, take the motor unit off the out off chopping bowl lid by
pushing ejection button.
8. Then remove the chopping bowl lid.
9. Carefully take out the blade.
10.
Remove the processed food from the chopping bowl
.
