How to start
1. First of all, pull out the power cord from the cord reel to the needed length; insert the power
cord plug into the power socket, and press down the power switch button with finger or step
on it with foot; then you can control the start and stop of the cleaner.
2. The yellow mark on the power cord indicates its desired length. Never pull out the power
cord to the length exceeding the red mark.
Protective devices of motor
1. There is a temperature controller designed in the body of cleaner motor, which can automatically
cut off the power supply of motor to prevent overheating. When the air-inlet or air-outlet pipe is
overloaded or blocked, the temperature of motor rises, then the temperature controller cuts off the
power supply of motor automatically to make the motor cool, preventing the cleaner from being
damaged.
2. If the temperature controller is cut off, stop the cleaner immediately and pull out the power plug
to make the cleaner cool, and check and remove the hair roll or other roll-like rubbish blocking the
air inlet (including the hose and the spile), and replace the filter HEPA or filter gauze when necessary.
3. After cooling the motor for 30mins, plug in the power plug and check whether the temperature
controller has been reset. If the power supply of the cleaner hasn’t been cut off, the temperature
controller of the motor won’t be reset even when the motor has become cool.
1. All the day-to-day maintenance and repair jobs should
be done after the power plug has been pulled out.
2. Frequently remove the rubbish from the dust barrel, so
as to avoid the failure of the cleaner.
3. Never wipe the surface of the cleaner with gasoline or
oily liquid. Wipe it with water or neutral detergent. Caution:
be sure to wring out the wiping cloth dry for wiping, it is
prohibited for water to infiltrate into electrical elements of
the cleaner.
4.When the cleaner is placed idle not in use, it should not
be put directly in the sun or in a damp place.
Operation Instructions
Maintenance of the Cleaner
