Motors do not run:
1.
Battery is not fully charged (
c
harge the battery).
2.
Transmitter battery is low (
c
harge or install a fully charged battery).
3.
Motors are not connected properly (
c
heck the motor to ESC connections and the ESC to battery
connections).
4.
Receiver is not bound to the transmitter (
c
onsult your radio manual and go through the binding
procedure).
5.
ESC is in set-up mode (
h
old model and move throttle up to full then back to idle, or reverse the
throttle channel on your transmitter. Switch everything off before doing this).
Model moves backwards:
1. Propeller
fitted on backwards
(
s
wap the propeller around).
Control surfaces not moving with stick input:
1.
The servo leads are not connected properly (
c
heck the servo connections).
2.
The servo is damaged (
r
eplace the servo).
The model does not fly straight:
1.
Control surfaces are not at neutral (
a
djust the trims/sub trim on your transmitter).
2.
C of G is not correct (
r
e-position the battery to achieve correct balance).
3.
Model does not climb well:
1.
The battery is not fully charged (
c
harge the battery).
2.
The elevator servo is reversed (
c
hange the direction via your transmitter settings).
3.
C of G to far forwards making it nose heavy (move battery backwards or add weight to tail).
17
TROUBLE SHOOTING:
