1.5mm
A B
Drill holes using the stated
size of drill
(in this case 1.5 mm Ø)
Use epoxy glue
L/R
Assemble left and right
sides the same way.
Hatched-in areas:
remove covering
film carefully
X
Not included.
These parts must be
purchased separately
Check during assembly that these
parts move freely, without binding
!
CA
Take particular care here
Apply cyano glue
Low setting
SILICON
EPOXY A
EPOXY B
CA
GLUE
Epoxy Glue (5 minute type)
Silicon sealer
Cyanoacrylate
Glue
6 channel radio for airplane
with 5 standard servos and 3 mini servos
Nylon tube
Extension for aileron,
Flap , Elevator servo.
REQUIRED FOR OPERATION (Purchase separately)
Epoxy Glue (30 minute type)
TOLLS REQUIRED
Hobby knife
Needle nose Pliers
Phillip screw driver
Awl
Scissors
Wire Cutters
(Purchase separately)
Hex Wrench
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
Sander
Masking tape - Straight Edged Ruler - Pen or pencil - Drill and Assorted Drill Bits
(Purchase separately)
CONVERSION TABLE
1.0mm = 3/64”
1.5mm = 1/16”
2.0mm = 5/64”
2.5mm = 3/32”
3.0mm = 1/8”
4.0mm = 5/32”
5.0mm = 13/64”
6.0mm = 15/64”
10mm = 13/32”
12mm = 15/32”
15mm = 19/32”
20mm = 51/64”
25mm = 1”
30mm = 1-3/16”
45mm = 1-51/64”
If exposed to direct sunlight and/or heat, wrinkels can appear. Storing the
model in a cool place will let the wrinkles disappear. Otherwise, remove
wrinkles in covering film with a hair dryer, starting with
low temperature. You can fix the corners by using a hot iron.
Gas Engine: 20cc
Flapx2 standard servo - Aileronx2 standard servo
Rudderx1 standard servo - Elevatorx2 mini servo
Motorx1 mini servo
Glow 1.20 4T Engine
SK3-4240-740Kv
Brushless Motor
1
