Airframe Assembly
*Note* For optional rudders, insert rudder servo leads at this time. See page 8 for rudder installation.
1) Locate elevator servo extension and insert
through the left tail boom. The female servo
plug should be toward the tail.
2) Connect elevator servo plug to servo
extension. Secure with tape or servo clip.
3) Attach horizontal stabilizer to tail booms
using 4 * M2x16mm screws and nuts. Secure
with blue thread lock.
4) Attach vertical fin using 4 * M2x16mm
screws and nuts. Secure with blue thread lock.
*Photo shows PNP airframe. Plywood FPV tray and decal set not shown.
Contents
3
