4
CESSNA TTX
Step 1:
Clip the undercarriage into the slot in the fuselage,
squeeze the legs together slightly so that it fits into the slot. Once
in place remove the pressure and it will hold in place, no retaining
screws are required.
Step 2:
Apply some medium or slow setting CA glue to the cut out in
the rear of the fuselage and glue into place the horizontal stabilizer.
Attach the elevator clevis to the control horn when glue has set.
Summary of Contents for CESSNA TTX
Page 4: ...3 KIT CONTENTS H KING...
Page 11: ...10 H KING Recommended Batteries...
Page 12: ...CESSNA TTX...