L 720 – C / THB691S
5.
Technical parameters
A)
Watch the recordings on computer :
In the shutdown mode or standby status, can connect sunglass with computer, the computer
will pop up removable disk logo, the video file is saved on the directory of
*disk\DCIM\100DSCIM\, during the camera and computer transfer data, the light flashes
rapidly; Need to uninstall the device, please click on the task bar on the bottom right corner of
the icon to the management of removable devices, uninstall the inside removable storage
devices, when the system recognizes the hardware can be safely pulled out, and then
disconnect the camera and computer connections.
Note: According to a computer or system configuration differences, the time to identify
removable disk will be slightly different, please be patient, this period is best not to carry out
the operation of the camera, so as to avoid the impact of the computer hardware
identification. If did not identify to a removable disk for a long time, try to re-insert, if still
unable to identify the hardware, make sure that your operating system, driver, 2.5’ port
interface cable are all normal; please uninstall the hardware with the normal process, so as to
avoid to damage the computer or device.
B)
Charge:
Connect to computer USB interface or charger. During the charging, the red light flashes. When
the battery is fully recharged, the blue light is on.
Note: The recorder is with built-in high-capacity lithium polymer battery. The battery is with no
memory effect. It can be used and charged at anytime. But for the initial five times of charging,
please charge battery to saturation after the battery runs out. It is to activate the battery
maximum capacity and maintain the standard working time. In order to maximize the capacity
of storage battery, please continue to charge for 30 minutes to 1 hour after the indicator light
long bright.
6.
Trouble shooting
Trouble
Possible reason
Solution
Don’t Start
. Flat battery
. Malfunction of the device
. Charge the battery
. Restart the device
Automatic Stop
Flat battery
. Charge the battery
Device not recognized when
connected to PC
. Damaged USB cable
. The USB connection is not
recognized by your computer
. Problem with the computer
. Replace the USB cable
. Update USB Drivers
. Restart the computer.
Data not saving
Memory full
Delete unwanted files
