H.C Duke & Son Arby's Electro Freeze Compact Series, Operator'S Manual With Replacement Parts List

Page: 52 / 71

ELECTRO FREEZE Shake Model CS704
185260 42
13 Troubleshooting Charts
— continued
Keep your freezer in excellent condition. Always contact your Electro Freeze distributor
for replacement parts and maintenance scheduling.
NOTE: Contact your authorized Electro Freeze distributor for instructions prior to
warranty compressor replacement.
QUALITY PARTS
PROTECT
YOUR
EQUIPMENT
PROBLEM PROBABLE CAUSE REMEDY
Product dispenses slowly out of
dispensing head.
1. No product in hopper. 1. Fill hopper.
2. Product too cold. 2. See “Dispensed product too
hard.”
3. Mix feed tube not open. 3. Check mix feed tube setting.
Compressor and beater motor
operates only when dispensing.
1. Defective torque control. 1. Contact your Electro Freeze
Distributor for service.
Compressor will not start -
hums intermittently (cycling on
overload)
1. Improperly wired. 1. Contact your Electro Freeze
Distributor for service.
2. Low line voltage. 2. Ask power company to
increase voltage to not less
than 10% below dataplate
rating or have transformer
installed. Have wire checked
for inadequate wire size.
3. Open start capacitor. (Single
phase only)
3. Contact your Electro Freeze
Distributor for service.
4. Defective compressor 4. Contact your Electro Freeze
Distributor for service.