GYS 3154020022256, Manual, Page: 17 / 68

17
PORTASPOT 230
EN
Maximum welding rate without thermal activation at ambient temperature of 20°C, when in simple im -
pulsion in AUTO mode:
Spotting with simple impulsion in AUTO mode
"Maximum welding rate
without thermal protection activation - 20°C "
0.6 mm + 0.6 mm 1 spot every 20 sec.
0.8 mm + 0.8 mm 1 spot every 25 sec.
1 mm + 1 mm 1 spot every 30 sec.
1.2 mm + 1.2 mm 1 spot every 45 sec.
1.5 mm + 1.5 mm 1 spot every 1 mn 10 sec.
2 mm + 2 mm 1 spot every 2 mn 10 sec.
ANOMALIES, CAUSES, SOLUTIONS
The welding spot does not hold:
- The power supply is faulty (low voltage, inadequate extension, faulty electrical outlet)
- Welding parameters (strength and diameter of the electrodes, welding time) are not suitable for the task being performed.
- Elements that are part of the secondary circuit (carrier arm / arm / electrode holder) are ineffective because of loose or oxidised screws.
PX ARMS TECHNICAL SPECIFICATIONS
Arm
Clamping force (daN)
Welding intensity (A)
minimum maximum
PX1 30 120 6300
PX2 25 80 6050
PX3 25 80 6050
PX4 15 50 5800
PX5 30 120 6300
PRODUCT SPECIFICATIONS
CARACTÉRISTIQUES ÉLECTRIQUES
U
1N
rated power supply voltage
1 ~ 230 V
Frequency
50/60 Hz
U
20
rated no load voltage
2.45 V
Permanent power U
SP
1.25 kVA
Permanent supply current I
1p
5.3 A
Maximal current of a permanent primary short circuit I
1cc
67 A
Maximal current of a secondary short circuit I
2cc
6300 A
Permanent secondary current I
2p
500 A
Type of welding current
THERMAL SPECIFICATIONS
Operating ambient temperature
De + 5°C à + 40°C
Storage and transport operating ambient
De -25°C à +55°C
MECANICAL SPECIFICATIONS
Fmax maximum welding force
120 daN (270 lbf)
Protection rating
IP 20
Dimensions
Without arms :
L : 36 cm x l : 10 cm x h : 29 cm
L : 14.2 in x l : 3.9 in x h : 11.4 in
Weight
10 kg
Range of distance of the arms e
90 mm (3.5 in)
Range of length of the arms l
De 110 mm à 350 mm
F1min minimum welding force
30 daN (67 lbf)