GYS 026117, Translation Of The Original Instructions, Page: 11 / 44

11
STARTRONIC HYBRID 950
EN
Translation of the original instructions
OPERATING INSTRUCTIONS
Standard connection
1 Ensure that the vehicle battery terminals are clean, free of grease and corrosion.
2 Connect the clamps to the battery terminals. The booster lights up by itself.
Standard mode
1
STARTRONIC detects a battery.
The digital display shows the voltage of the vehicle battery .
2
Les supercondensateurs du booster se rechargent automatiquement.
L’affichage numérique indique leur pourcentage de charge
.
If the vehicle’s battery is too low to recharge the Startronic’s supercapa-
citors, the lithium backup battery automatically switches on to recharge
them.
3
When the charging of the supercapacitors comes to an end, the ignition signal
appears
.
4
Wait until «FUL» appears on the display and the beep sounds and then start the
engine.
5
Working cycle :
If the motor does not start on the first attempt, make a maximum of 3 start attempts
consecutively.
Plan an interval of 20 minutes between each session (1 session = 3 starts).
Bypass mode
If the supercapacitors do not recharge during a standard mode procedure,
Or
If there is no battery mounted on the engine to be started, connect as shown below: