Channel Selector
Although not in the Main Menu, when pressing the Mode Selector Button (Big button) against your
headrest the channel selector appears automatically if it was configured in the Appearances menu.
You may encounter this screen early in the setup process.
Select the computer mode by pressing the Mode Selector button (Big button) on the headset very
briefly and close channel selector by clicking ‘Back’.
When pressing the Mode Selector Button (Big button) against your headrest the channel selector
appears automatically if it was configured in the Appearances menu.
The headset can be used to control computers or to drive wheelchairs. There is a possibility to switch
between computer control and wheelchair drive channels. Therefore there are two types of ‘press’
the user can do with the Mode Selector.
1.
Short press (a very quick press, about half a second) switches between active and inactive
modes of the chosen function – e.g. when in computer control mode, a short press activates
or deactivates the control of the mouse cursor.
2.
Long press (about 2 seconds) switches between the channels or control functions – e.g.
switches between computer control and wheelchair control.
You can add further PCs or wheelchairs to control and you can switch between them.