14
10. Calibration and Alarms
Calibration
When in Balance Mode, if the G11 moves forward or backward on its own on flat ground, it needs to be calibrated
if the problem persists, please contact after-sales service.
To Calibrate the Swift G11
Confirm that the hoverboard is in the off state and keep both side of the pedals parallel to the horizontal plane.
Make sure the hoverboard is turned off , press and hold the power switch for 5 seconds and then release it. When
you hear a sound, the system starts to calibrate;
the red light (that is, the running indicator and the left turn indicator) flashes 3 times. Wait until the red light is
on, the system calibration is complete, and you can cycle
when you turn it off and on again.
Self-balance
App adjustment: conversion of self-balance and not self-balance on app.
Manual adjustment: Place the car horizontally - make sure the G11 is turned on,press the power switch for about
6 seconds, until you hear the beep, then restart the hoverboard, the adjustment complete.
Child mode/ Adult mode
App adjustment: conversion of adult mode and child mode on app.
Manual adjustment: Stand up the G11, press the power button to turn it on - release the button - then keep
press. The button remains for about 6 seconds until the beep is heard and the balance hoverboard is restarted.
Complete child mode switching
Alarm
a. Overheating Riding for an extended period of time could increase the internal temperature of your G11 in
excess of 122°F(50º C). If this happens, the glow lights will flash red, an alarm will sound and your G11 will not be
able to charge. Simply step off the G11, power them off, and give them time to cool back down to a normal
operating temperature
b. Speeding riding will cause a lift alarm, please note the speed you set in the app.
c. Other alarms.
For any other alarms, try restarting your G11. If the problem persists, please contact after-sales service.
15
11. About app
1
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
Click the Bluetooth icon to open the bluetooth and enter the Bluetooth link
Show the speed of the hoverboard.
Battery reminder (now it shows the battery empty)
Click this button to enter the switch and warning page.
Click this button to enter light color change page
Click this button to enter model adjustment and speed control page.
Search the bluetooth of the hoverboard.
Click this button to control the switch machine
Open this function when you need to left hoverboard fora while, it will warning
Fault Analyse help you to find the problem of the hoverboard.
Light color control page.
10
11
Home
Bluetooth Connection
8
9
10
11
Analysis and warning
Color Adjustment
Settings
