3
Note: Repeat steps 3 and 4 for any additional Gyration
®
GO 2.4 GHz mice,
keyboards, and/or remotes that will be added to the system.
5. Connect Mode will automatically time out after one minute.
After the Connect/Connect sequence is performed, the receiver and device(s) will
remain synchronized after powering down.
It is only necessary to perform the
Connect/Connect sequence when setting a device up for the first time or when
adding additional devices to the system.
To set up and synchronize the Compact Keyboard and the
RF Receiver:
1. Connect the RF receiver into an available USB port and power on your
computer. Your operating system should detect the new hardware device
and initiate the installation procedure. Continue to follow the standard USB
device installation screens until installation is complete.
2. Insert four AAA batteries (included) into the keyboard.
3. Press and hold the
Connect
button on the receiver for two seconds, and
then release it. The
Connect
light will blink rapidly, indicating the receiver is
in “Connect Mode.”
4. Press and release the
Connect
button located at the top of the keyboard.
The
Connect
light on the receiver will stop blinking and
remain lit.
2
Status
LED
Connect
Button
Connect Button
RF Receiver
Top of
Compact Keyboard
The above illustrates the Connect/Connect sequence discussed in this guide.
GC1105CKM_NA_IB_REVA_K6.qxd 2/11/05 12:51 PM Page 6
