6
GT4.0 TREADMILL
ASSEMBLY INSTRUCTION
STEP 1
Take out the machine from box and put it on the flat floor. (As shown),remove all PE bags and bags
wrapped on the machine.
STEP 2
Fold the machine up to make sure that the non-return pipe is firmly fastened. Take out the left and
right upright post, and use two inner Allen C.K.S.half thread screw tighten from the inside and out
respectively. Use a M8*20 with inner hexagon bolts from top to bottom for locking!
Note: when installing the right riser, pay attention to properly connecting the communication line
between the riser and the base, and avoid clamping it!
