23
English
■
Removal
1
Turn the cap and the base generator
counterclockwise.
2
Turn the ceramic particle cartridge counterclockwise
while holding the cap.
■
Installation
1
Turn the ceramic particle cartridge clockwise while
holding the cap.
2
Turn the cap and the base generator clockwise.
Before installation, make sure that the packing of the cap and the
base generator are installed.
After installation, make sure the cap and the base generator are
securely attached.
3
Pour water into the bottle of the product and check
the water leakage.
Close the cap lid firmly, then shake the product up and down to
check the water leakage.
Removal / Installation of parts
Loosen
Tighten
Tighten
Tighten
Loosen
Loosen
When using the product for the fi rst time
When using the product for the first time, remove the parts and wash them well.
■
Cap
・
Bottle
・
Base generator
Wash them well with neutral detergent.
For details, refer to "How to care" (
l
page 26).
.
●
Do not use a dishwasher or a dryer.
.
●
When washing the base generator, close the cap of the power connection port firmly.
.
●
Since the product is made of plastic, please use soft sponge, etc.
.
●
At the beginning of use, the inside of the generator is dry.
For this reason, the hydrogen concentration of the generated hydrogen water and the sterilizing capacity of the generated
sterilizing water may not reach the specified values.
.
●
Generation performance may not be fully demonstrated for a while after using the product for the first time.
As a guide, the condition will continue for about one month. (When using the product three times a day.)
■
Ceramic Particle cartridge
Place the ceramic particle cartridge removed in a cup or another
container and wash by shaking it for about 10 minutes in running water.
.
●
Use a container big enough to soak the ceramic particle cartridge in water.
(A cup is suitable.)
.
●
Shake the ceramic particle cartridge well in the container.
If the shaking is not enough, the ceramic particle cartridge may not be washed perfectly.
.
●
If you use the ceramic particle cartridge without washing or in an insufficiently washed
state, the generated hydrogen water may smell.
.
●
When the ceramic particle cartridge is replaced, clean the new one in the same way.
.
●
The ceramic particle cartridge contains calcium balls. The calcium balls will deteriorate.
Summary of Contents for SilkyPure HWP-3690H
Page 1: ......
