Gyms GymSilky HWP-333SL, Instruction Manual

Page: 24 / 28

24
English
Charge
The battery has not been charged sufficiently when shipped. Charge the battery before using it.
2
1
3
The power connection port
Groove
. ●
If you do not charge for a while, the battery
may discharge electricity and be unusable.
It is recommended to charge the battery
frequently.
Required charging time is about 3 hours
in case of a dead battery.
1
Open the cap of the power connection port.
2
Insert the exclusive USB cord connector into the power connection port, so that the grooved side is
downward.
Make sure that the grooved side of the USB cord connector faces downward and insert it into the power connection port firmly
and horizontally.
3
Insert the connector of the exclusive USB cord into the AC adapter attached and plug it into an outlet.
The LED lights up red, and charging starts.
When the charging is completed, the LED lights up green.
Notice
. ●
It is also possible to charge by connecting the USB code to a USB port on a computer.
. ●
When charging the battery using PC port, there is a case that the LED does not light up in red, or the LED flashes. In this case, the
charging voltage is not high enough. Try changing the connection port.
. ●
When the remaining battery capacity is low, the LED may turn off during generation (before the specified time). In this case, charge the
battery for 15 minutes or longer and generate the hydrogen water again.
. ●
Remove the AC adapter from the outlet when not in use.
. ●
The AC adapter attached is manufactured for use in Japan. It can be used, however, in any other country other than Japan.
. ●
Because the shape of the power outlet varies depending on the country and region, a plug adapter is required. Please purchase a
plug adapter after consulting with a travel agency or dealer.