Gym Dandy TEETER TOTTER TT-320, Owner'S Manual

Page: 11 / 15

STEP 5 (See Diagram 5)
A.) Place a Seat Pad (#8) onto the Left Seat Support (#5)
，
Secure the front hole on the Left
Seat Support with one M10 x 3 3/8” Allen Bolt (#20), Ø ¾” Lock Washer (#29), and Ø ¾”
Bent Washer (#26). Secure the rear hole with one M10 x 4 1/8” Allen Bolt (#24), Ø ¾” Lock
Washer (#29), Ø ¾” Washer (#27), and Rubber Bumper (#14).
B.) Attach the Handle Cover (#10) to the tube on the Left Seat Support (#5). Align the holes
and insert the Handlebar (#9) halfway through the tube. Push two Handlebar Grips (#11)
onto the tube from both ends.
C.) Repeat Procedures A & B above to install the other side.
D.) Cover each Seat Pad (#8) with a Seat Pad Cover (#30).
E.)
Do not remove the carabineer from under the Left Seat Support (4).
F.) Insert the L-shape locking pin into the washer on the cable strap to prevent
unauthorized access when the teeter totter is in use.
10