GW Instek PEL-3000 Series, User Manual

Page: 62 / 257

PEL-3000(H) User Manual
60
+CV Mode
Description
+CV mode can be added to CC, CR and CP mode.

The +CV settings apply to all applicable modes.
Operation
1. Make sure the load is off.
2. Press
Main
and select to Mode, I Range and
V Range.
3. Set the +CV voltage level. (You may need to
scroll down to the +CV setting)
Range: OFF - rated 5%
Display
Mode
CP + CV
I Range
H 8.75A
V Range
L 80V
Function
Dynamic
Configure
0.000
V
0.0000
A
0.00
W
+CV 5.500
Timer2 0.025
Timer1 0.025
LOAD RS232
01/Oct/2018
V
ms
ms
+CV setting
Note
The +CV settings apply to all the applicable operating
modes.
For example: The +CV settings made in CR mode will
be carried over to the +CV settings in CC and CP
mode.
Note
+CV settings cannot be controlled with external
control. (The external control is not possible only in
+CV settings)
See page 168 for +CV settings with external control